Sayerlack clear waterborne polyurethanes from Italy are hard wearing medium solids two part polyurethanes.
Suitable for use on
- Interior Doors
- Shop Fitting
|Product||Gloss||Sizes||Catalyst||Thinner||Solids||Drytimes - Full Cure||Technical Data Sheet||Safety Data Sheet|
|AU0482/00||Sealer||4L, 25L||None||5 - 10%||35%||15 minutes||download||download|
|AF7205/00||5%||4L, 25L||None||5 - 10%||31%||24 hours||download||download|
|AF7210/00||10%||4L, 25L||None||5 - 10%||31%||24 hours||download||download|
|AF7230/00||30%||4L, 25L||None||5 - 10%||31%||24 hours||download||download|
Special instructions: During application, the temperature of the product, the substrate and the environment must be no lower than 15°C. Coating residues (washing water, booth water, used coating) must be disposed of in accordance with current legislation. Do not pour residues down the drain. In view of the wide variety of materials used for manufacturing wooden products, when switching from a solvent-based to a waterborne painting system it is always advisable to contact your suppliers’ technical departments to check whether your equipment and components are appropriate or whether more suitable types exist. In particular, check: electrostatic guns, pumps, seals, silicones, glues, booth treatment water products, packaging materials, putties, sandpaper, etc.